14 comments on “Testimonials
  1. GJH says:

    Mr. Yonky is a fun guy to deal with, fast service, great product, honest pricing!
    Try him, you won’t regret it!

  2. JeffinNZ says:

    Ian’s material is first rate. He has supplied both copper and aluminium to me in New Zealand at very reasonable rates. The material produces fine gas checks that SHOOT.

  3. cdet69 says:

    Just a pleasure to deal with. Willing to take the time to answer all your questions and offer some suggestions as well. Packed very well and prompltly recieved. A+ all the way.

  4. Steve says:

    I was able to punch out a few hundred from the aluminum. Everything ran smooth as silk in my Freechex III. The aluminum I could find locally bound up constantly and I had to clean the Freechex often. I couldn’t be happier with it.

  5. david caughey says:

    I received the coils last week and have made a bag of checks. This allumunim seems to be much softer and more maliable then others that I’ve tried and forms good quality checks. Bullets with the new checks seem to produce some good results so far.

    Thanks again for the exceptional customer service! Charlie recommends your product highly


  6. Dave says:

    I received my order today and have made a few gas checks with it. This is just what I was looking for and it worked wonderfully.

  7. admin says:


    I received the 5 rolls of 1/2″ x .014″ aluminum and have started making gas checks on my FreeChex III. Everything is working perfectly and the .30 Cal checks fit nicely on 3 different molds I cast boolits in.

    Thanks again for the personalized service and fast response to all my questions.

    Sean T.

  8. Mike F says:

    Ian is a breeze to deal with, fast, accurate shipping and a great quality product. I can see why Charlie recommends him. I got my first batch of coil about 2 weeks ago, got carried away with my FreeChex III and punched out over 8,000 checks (yea, I’m retired and the free time comes in handy). Loaded up about 120 .223 and took them to the range. We’ve got the same accuracy with cast boolits and Ian’s gas checks that cost me 1/4 of factory ammo.
    Just ordered my second batch for .223 along with new aluminum to punch out 30 cal gas checks on my second FreeChex III when it arrives on Wed. Thanks Ian
    Mike F

  9. Mike F says:

    I told a few other shooters at the range about my gas checks and now I just ordered 6 more coils of alum to do the orders I received. Cost is generating my orders, cast boolits are way more affordable than the factory ammo, especially since Obama was awarded “Gun Salesman of the Century” a few months ago. Thanks Ian.

  10. Gary martin says:

    Hi Ian, The coils are great, I’m spoiled now! It makes the process so much easier when you have good raw materials in a good form factor. I will be ordering more when my stock gets a little lower. If and when Pat gets my Checkmaker to me I will be pursuing getting the right width to fit it. In the meanwhile I’ll just keep having fun with the FreeChex from Charlie. Thank you for providing a great product at a very reasonable price. Best wishes, Gary

  11. Richard "Mr. Awesome" Shedd says:

    I’ve used the half hard aluminum coil for 35 caliber gas checks and the dead soft aluminum coil as well. Both are outstanding products. They save me a whole bunch of time, produce great checks, and store easily.

    In addition to the awesome products, you also get great customer service. Just outstanding product and customer service all around.

    You can’t go wrong with this product, or this company.

  12. Klaus Aßmann says:

    I’ve been a long time buyer of Yonky. I buy coils for several calibers.
    The coils are made of copper and aluminum. Yonky is a very helpful and reliable man.
    His material is the best you can buy.

    Klaus from Germany

  13. Joel Foster says:

    I ordered some of the Aluminum in .0145 from Yonky back in Dec of 2013.. WOW .. I can’t say enough about how FAST and friendly he was about the order. His responses were very fast and I really do appreciate their willingness to put up with my questions.. I would not hesitate to recommend him to anyone looking for the metal for Gas checks.. The material I received was packaged very well and honestly I received it MUCH faster than I had anticipated ..Yonky has FANTASTIC Customer Service.
    Thank You
    from Douglasville Ga.

  14. admin says:

    Raymond Hauver wrote:

    Hi Gil;

    The mail-person just dropped off the coils about 1/2 hour ago.

    I have already punched and formed 2 dozen checks with my checkmaker.

    To say that I am impressed is an UNDERSTATEMENT !!

    The quality is there and they grip the bullet shank better than the 0.010 aluminum flashing checks that I made, just to try my hand at making some …forget about soda pop can material…it just tears and does not form correctly…too thin.

    I now know where to go for my supplies… I plan on sending you another money order for three (3) more rolls 1/2 x 0.0145 x 50′ after the first of the month… cannot wait to start laying material away… better to have and not want, then to want and not have…

    Ian and you both are providing a service to us little home bullet casters, and I for one, THANK you and him for that…


    Ray Hauver

Leave a Reply

Your email address will not be published. Required fields are marked *


Find me on YouTube